SCAN-C, -CM ja -M -sarja

SCAN-C 20:1965 Floating tendency and swelling of pulp sheets [Chemical pulps]Lataa

SCAN-C 32:1978 Heat treatment for ageing tests [Fluff]Lataa

SCAN-C 33:1980 Specific volume and absorption properties [Fluff]Lataa

SCAN-C 45:2000 COD and TOC removable by washing [Pulp (wet, never-dried chemical pulp)]Lataa

SCAN-C 62:2000 Water Retention Value [Chemical pulp]Lataa

SCAN-CM 6:2005 Fibre fractionation – in the McNett classifier [Mechanical and chemical pulps]Lataa

SCAN-CM 11:1995 Preparation of laboratory sheets (optical properties) – Sheets for measuring ISO brightness [Mechanical and chemical pulps]Lataa

SCAN-CM 27:2000 Preparation of laboratory sheets for determination of light-scattering and light-absorption coefficients, opacity and Y-value [Mechanical and chemical pulps]Lataa

SCAN-CM 31:1977 Initial wet-web tensile strength, stretch and tensile energy absorption – 25 % dry matter content [Mechanical and chemical pulps]Lataa

SCAN-CM 32:1978 Heat treatment for ageing tests [Fluff]Lataa

SCAN-CM 37:1985 Knot content [Fluff]Lataa

SCAN-CM 38:2005/SCAN-P 74:2005 Calcium, magnesium, iron, manganese and copper content – Atomic absorption spectroscopy [Pulps, papers and boards]Lataa

SCAN-CM 39:1994 Kuiva-ainepitoisuus [Massanvalmistuksessa käytettävä hake]Lataa

SCAN-CM 40:2001 Size distribution [Wood chips for pulp production]Lataa

SCAN-CM 41:1994 Sampling [Wood chips for pulp production]Lataa

SCAN-CM 42:2006 Bark content [Wood chips for pulp production]Lataa

SCAN-CM 43:1995 Basic density [Wood chips for pulp production]Lataa

SCAN-CM 44:1997 AOX, COD and TOC removable by washing [Pulps (dried market pulps)]Lataa

SCAN-CM 46:1992 Bulk density [Wood chips for pulp production]Lataa

SCAN-CM 47:1992 Thickness and thickness distribution [Wood chips for pulp production]Lataa

SCAN-CM 48:2001 Length and length distribution, width and width distribution [Wood chips for pulp production]Lataa

SCAN-CM 49:2003 Content of acetone-soluble matter [Wood chips for pulp production and pulp]Lataa

SCAN-CM 53:1994 Wood content in the bark fraction [Wood chips for pulp production]Lataa

SCAN-CM 54:1997/SCAN-P 73:1997 Cadmium and lead content – Atomic absorption spectrometry – graphite furnace technique [Pulps, papers and boards]Lataa

SCAN-CM 55:1999 Extractable organic chlorine [Mechanical and chemical pulps]Lataa

SCAN-CM 57:1999 Total sulphur content [Mechanical and chemical pulps]Lataa

SCAN-CM 59:2001 Preparation of tablets for the measurement of ISO brightness [Wood chips for pulp production]Lataa

SCAN-CM 60:2002/SCAN-P 81:2002 Microbiological examination – Total colony number – Using the dry rehydratable film method [Mechanical and chemical pulps, paper and paperboard]Lataa

SCAN-CM 61:2002/SCAN-P 82:2002 Microbiological examination – Surface colony number – Using the dry rehydratable film method [Mechanical and chemical pulps, paper and paperboard]Lataa

SCAN-CM 63:2005/SCAN-P 83:2005 Sodium and potassium contents – Atomic Absorption Spectroscopy (AAS) using a flame [Pulp, paper and board]Lataa

SCAN-CM 64:2000 Preparation of laboratory sheets for physical testing – Closed water system [Mechanical and chemical pulps]Lataa

SCAN-CM 65:2002 Total acidic group content – Conductometric titration method [Pulp]Lataa

SCAN-CM 66:2005 Fines content [Mechanical and chemical pulps]Lataa

SCAN-CM 67:2003 Content of extractable lipophilic matter [Wood chips for pulp production and pulp]Lataa

SCAN-CM 68:2005 Standard water for physical testing – Conductivity (40 – 150) mS/m [Mechanical and chemical pulps]Lataa

SCAN-CM 69:2009 Initial wet tensile properties at different dry matter content [Pulps]Lataa

SCAN-CM 70:2009 In-plane shrinkage of laboratory sheets [Pulps]Lataa

SCAN-CM 71:2009 Carbohydrate composition [Pulps]Lataa

SCAN-M 13:1983 Shives content – PFI Mini-shive fractionator [Mechanical pulp]Lataa

Viimeksi päivitetty 11.04.2024